Personal Plan Essay

My personal plan is to for me to better myself with my personal and educational goals. With the help of the Career Interests Profiler and Career Plan Building Activity I can identify what I need to work on. Also, they help make my SMART goals, which I think are necessary for me to complete to make my personal plan successful. My SMART goals are; take a Math workshop within the next 2-4 weeks to improve my math skills, take a writing workshop within the next 4-6 weeks to improve my writing skills, find a mentor that is an accountant within the next 6 months, explore the accountant job market within the next 2 months, and to take a study guide workshop within the next 3-5 weeks to improve my study skills. I think that those two results along with my ethics results will help me guide through my academic and personal journey. I also agree with my competency’s results. I think it is more important to work on areas that need improvement then to focus on my strengths I feel as though my Personal Career Interest results were correct. My career results are material recording, scheduling, dispatching, and distributing material recording, secretaries, administrative assistant, and supervisor of an office, administrative support worker and supervisor of sales worker. I also feel as though my results matched my strengths. The results revealed that my strengths are that I am conventional, enterprising, and social. I take my personal education and career goals very serious. I feel as though my goals are what is going to help me succeed in my education and career. My biggest personal education goal is to graduate with a Bachelors in Accounting. Another educational goal I have is to try my hardest to uphold a 3.0 GPA. When it comes to my career goals I know they are ones that I will accomplish, because they are the reason why I am in college. My first career goal is to become an accountant. Then once I am an accountant I want to work for my local hospital and be their accountant. And my final career goal is to have my own CPA business. I think that everyone should have education and career goals, because that is what pushes you to succeed. My career interests will help me guide through my academic journey, because I will know what courses I need to take to get my career. After taking the Career Interest Profiler, my results showed me that I am meant to be an Accountant. My competencies will guide me in many ways through my  academic journey. My competencies that will guide me through my journey are that I learn from failure and success, follow instructions from others, follow procedures and policies, achieve goals, uphold ethics and values, work under pressure and, demonstrate an immediate understanding of newly presented information. I feel as though pursing a degree does help me build on my competencies that I need for my future career. The competencies I need to build for my career are to set high standards for quality, build diverse teams, work under pressure, rapidly learn a new task and commit information to memory quickly. The academic work that I do for my course assignments are related in some type of way to all my competencies. For example my competency to set high standards for quality goes hand in hand with setting a goal to write the best papers that I can for my course assignments. My personal ethics, Career Plan competencies, and reasoning abilities results will all help me in many ways to guide me through my academic journey. My personal ethics will help me to know what is right and wrong when it comes to my academics. For example I will work hard to do my writing assignments instead of choosing to plagiarize. My competencies and reasoning abilities will also help me through my academic journey. All of my competencies and reasoning abilities will help me. I do not only believe that all three of these things will help me through my academic journey but that my academic journey will help me build on these things to make them stronger for future career.

American Literature Essay

The authors use symbolism to Illustrate their idea of desolation. In â€Å"A Noiseless Patient Spider†, Whitman uses a deserted spider to portray the soul as a hopeless being desperately searching for an anchor. While Dickinson uses a still body to portray the soul as elapses and unable connect with the outside world.In Whitman poem â€Å"A Noiseless Patient Spider†, the author uses a deserted spider to portray the desolation of the soul. In my opinion, the setting strictly illustrates an idea of deservedness and the feeling of loneliness. This is shown when it is said of the spider: â€Å"l mark's, where, on a little promontory, it stood, isolated;† (Whitman line 2). The spider is set on a high place overseeing it's vast surroundings yet Is unable to spot any Indication of life. This shows that the soul, much Like the spider, Is In a state of exaltation but still has a feeling of loneliness.Even though the spider Is on a ‘promontory' It still tries to reac h out to the vacant unknown In desperate hope of touching or even connecting with something. It's almost as if Whitman is saying that the soul, in comparison to the spider, longs for some type of acknowledgement. In Emily Dickinson poem â€Å"l heard a Fly buzz†, the poet uses a still body to portray the soul as helpless and unable to connect with the outside world. It becomes clear why Dickinson would choose to design the soul as in a helpless state because when you closely examine her era you can observe that women were not given much accreditation and merit.Her gender was looked at and even treated as helpless because women In her time and society were not for recognized for being Intelligent and making rational decisions. In the poem Dickinson Is faced with a lot of adversity but reports no Indication of retaliating. For example, she was unable to react when â€Å"There Interposed a Fly – † (Dickinson line 12) to Interfere In her observations. She was also h elpless when â€Å"l willed my Keepsakes – Signed away† (Dickinson line 121 even when her belongings where being distributed there was nothing she could do r say.One of the things that contributed to Dickinson helplessness is her inability to connect with the outside world. Dickinson herself lived a very secluded life. Poets. Org states that â€Å"Throughout her life, she seldom left her home and visitors were few. † So it becomes easy to see why it was so hard to relay her feelings and objections to the people that surrounded her deathbed in the poem. Conclusively, the venture of the soul can sometimes be a desolate pilgrimage. The two authors Walt Whitman and Emily Dickinson both Illustrate the barren soul in heir consecutive poems â€Å"A Noiseless Patient Spider† and â€Å"l heard a Fly buzz†.The two poems present the soul as empty vessels awaiting to be connected to some type of delve existence. In Whitman poem, he uses a deserted spider to po rtray the desolation of the soul. Whitman uses a setting which illustrates an idea of to portray the soul as helpless and unable to connect with the outside world. She inputs a lot of her life situations into her character, such as her prohibited contribution to society due to her gender and her preferred removal from her community.

Marketing Financial Services Essay Example | Topics and Well Written Essays - 2500 words - 3

Marketing Financial Services - Essay Example The following marketing areas would be considered in the discourse: the marketing tools used by the organization, the customers of the organization, including issues such as customer care, the current issues faced by the organization, and the control systems used by HSBC. HSBC Bank has been operating in England and Wales at the registered office located at 8 Canada Square, London E14 5HQ. It offers a diverse portfolio of financial instruments including savings and current accounts, investment accounts, credit cards, loans, mortgages, insurance and international services. It supports a wide range of education projects and initiatives throughout the communities where they do business. In addition, â€Å"HSBC supports a wide range of projects and initiatives that underline their commitment to UK businesses.† (HSBC, 2010, 1) The management of HSBC promotes diversity and equality of opportunities through programs where they establish partnerships with other business organizations. Accordingly, â€Å"representatives of HSBC Bank plc can provide advice on investment and pension products from selected providers, including companies within the HSBC Group, and on life insurance products from HSBC Life (UK) Limited.† (HSBC, 2010, 1) With the extent of drastic effects that the financial crisis have wrought, HSBC Bank remains strong in the market due to its strengths, as presented: (1) diversity of financial portfolio; (2) a strong customer relations skills; (3) a competent and professional management; (4) extensive global reach; (5) substantial resources. The multitude and variety of products and services enable HSBC to tap a wider range of clientele base from children to retirees. Their strong customer relations skills make their management and staff adept and competent to address customer relations issues and impending threats in the environment. An extensive global reach is a plus factor to tap potentials in diverse

Political issue Essay Example | Topics and Well Written Essays - 1000 words

Political issue - Essay Example The war has been the longest in the history of American history, yet till date it has not achieved its objectives clearly. Early in 2014, the pullout from Afghanistan was decided and agreed upon. In the wake of such circumstances, Afghanistan is a land locked country, and situation there in always impacts the peace and stability of region with its peace or otherwise state of existence. In the midst of the withdrawal of the ISAF forces, Afghanistan presents a new challenge. Afghanistan at present is at a challenge to itself, to the global peace, to the regional security, stability and overall dynamics of the international politics. Afghan government is frail and does not enjoy the resource or the infrastructure that will enable it defending itself against the rival groups and the outlaws. The very fact that the incumbent government’s influence is limited to the green belt is the reflection of the overall writ of state enjoyed by the American backed government. Afghanistan is an ethnic split country offers problems in multiple proportions. The challenge of ensuring and bringing about the Pukhtoon and the non- Pukhtoon on table and bringing them to terms with regard to the power sharing has been one of the challenges that needs to be looked into and addressed with regard to the overall future dynamics and future outlook of Afghanistan. The last decade or so since the invasion of United States of America has seen the isolation and total targeting of the Pukhtoon in the form of Taliban who were being targeted where ever spotted, based on this the country has seen severe ethnic divide within themselves leading to catastrophic outlook at present in the form of social divide and social disparity. The withdrawal of the allied forces will give the Taliban space and possible opportunity to get back into authority with regard to the offensives being undertaken and conducted against the Afghan government. The recent times have seen relatively increased trend in the

Combustion process, whether used for electricity generation or in Essay

Combustion process, whether used for electricity generation or in engines for transport, produce airborne emissions of environmental concern - Essay Example Acid rain is due to the presence in the atmosphere of SO2 and NOx which, after a series of reactions, are deposited as nitric and sulphuric acid in the form of rain. Particulate matter is known to cause serious respiratory diseases. Carbon sequestration is a method that allows the reduction of CO2 by capturing it at its source (e.g. a power plant) and storing it in non-atmospheric reservoirs such as geologic or oceanic reservoirs (Herzog). The Sleipner project is a working example of carbon sequestration technology. Off the coast of Norway in the North Sea, it is in fact the world's first commercial CO2 capture and storage project collecting about one million metric tons of CO2 each year since it was opened in 1996 (Sleipner CO2 project). The term "scrubber" is used to refer to a group of air pollution control devices that aid the removal of fine particles and/or gases (especially acid gases) from industrial exhaust streams. Scrubbers work by either physically removing substances from the exhaust gas stream or by chemically neutralising them so that they cannot do any harm once released into the environment. Wet scrubbing is used to clean gases from pollutants and particulates by putting in contact the exhaust gas stream with the scrubbing solution. The scrubbing solution can simply be water for the removal of dust or a chemical solution which contains reagents that can specifically target certain compounds. Removal efficiency of pollutants is improved by increasing residence time in the scrubber or by the increase of surface area of the scrubber solution. 2.2. Dry scrubbing Dry scrubbing is generally used to remove acid gases, such as SO2, primarily from combustion sources. All dry scrubbing systems consist of two main devices: 1) a device to introduce a solid sorbent material into the gas stream; and 2) a particulate control device to remove reaction products, excess sorbent material, any particulate matter already in the flue gas. 2.3. Seawater scrubbing The natural buffering capacity of seawater can be taken advantage of by using it as a sorbent in a scrubbing system. When SO2 comes into contact with seawater a reaction takes place between the SO2 and the CaCO3 present in the seawater, producing CaSO4 and CO2. This reaction is complete in a very short time, so the equipment required for seawater scrubbing can be compact. 3. NOx 3.1. Primary measures Primary measures can be applied pre-combustion. In Bowin low NOx technology, air and

Indias Participation in Global Economy Essay Example | Topics and Well Written Essays - 3000 words

Indias Participation in Global Economy - Essay Example The Indian society is now subject to western imperialism and quite a distinct reflection of the western culture, styles, and language and business activity. The economic environment of India, after the reforms has predominantly changed from socialist policies to more liberal policies, facilitating an expansion of international trade. Some cultural values are very strongly established amongst the Indian workforce and may deter further expansion of international trade but Indian culture is one of business orientation because of its historical significance and industrial background and thus strongly supports trade activity. Yet there remain some economic challenges that may deter further growth of the economy. These include an inadequate infrastructure to support a growth rate of 8%. With so much international pressures to quality conformance and timely production, India must invest in up gradation of its ports, rail networks, roads, and power and water supplies. Hence, in order for Ind ia to capitalise on its economic benefits, it must overcome these economic challenges and increase its international market presence by developing indigenous brands and thus expanding international trade. 1.Problem Identification and Analysis With the highest population in the world of about 1.1 billion, second largest to China, India has made its way amongst the world’s leading economies in the year 2007. ... ccording to the World Bank Report, its economic growth rate was 8%, close to 10.4% of China, despite the high dependence of its economy on the agricultural sector (World Bank 2004). Recently the economy has moved towards massive production orientation in the manufacturing sector and there has been an observable proliferation of information technology and telecommunications. It is the augmentation within this sector, the software companies and call centres that have fuelled the economic growth in India. India has developed the right infrastructure to facilitate this rapid economic growth through development of an educated, English speaking workforce and thus has become a hub for outsourcing for large multinationals and overseas services to US companies (Banik 2007). Many companies like Ford Motors, General Motors and software companies have subcontracted their business services including customer service support, business support and troubleshooting computers, to this sector of Asia. Moreover, the country also has some skilled personnel to conduct customer surveys and research that provides the foundation for its international trade. Many companies are considering outsourcing their most expensive marketing process that is research, to the low cost researchers in India (Suresh 1999). The main reason that has fuelled this structural change is the emergence of a class characterised with young business professionals. It is also the culture of the country that promotes diligence, struggle and goal orientation (Kumar and Agarwal, Liberalization, Outward Orientation and In-house R&D activities of multinationals and local firms 2000). Therefore, the impact of globalization has been tremendous on Indian economy. With more and more companies looking to outsource in attempt to

Intelligent Design is it Science Essay Example | Topics and Well Written Essays - 750 words

Intelligent Design is it Science - Essay Example To support his view, he has used example of the law of physics, with relevance to radio signals. Dembski states that radio signals take diverse form as a contingent form, extensive and multifaceted. To further supports the theory of Specified complexity, he states that intelligence leaves behind a mark or a trail, which makes up a design community, hence it describes the nature of specified complexity. An event is considered to be specified complexity if the element in it, can’t be explained by probability, which is the amount of expectation of occurrence of the unpredictable event. Meaning, an individual never expects an event to occur, because of its unusual and unware nature and the individual’s inability to explain that event is intelligence (Dembski, 712). Dembski believes that intelligent design should be taught in school as natural and scientific phenomena, but teachers face problem of fate and beliefs while teaching the intelligent design theory. The core of the problem is, the explanation of intelligent design theory to students, how intelligent design is science and not a religion. He further states that intelligent design should be taught in biology classes, to high school students. Keeping in view that the method of conversion does not account for specified structure, which is compound in nature, in biology. Although educators should act passively while teaching intelligent theory as one tends to comply to his own perceptions with the design theory (Dembski, 715).

Accountability Essay Example | Topics and Well Written Essays - 250 words

Accountability - Essay Example They both set a level of standards for their subjects which they are required to conform and abide by in the accountability administration. The two organizations monitor and regulate different subjects. The APSA regulates individuals who are involved in political science; these include students, teachers and professors (The American Political Science Association, n.d). The New York State Public Officers Law Code of Ethics sets a frame work for officers and employees (‘Public Officers Law’, n.d). The difference in the subjects and nature of professional discipline means that different principles need to be applied in either case. Though the two codes share similar goals in their implementation of principles, they have a different jurisdiction as the New York code is limited to the state public officers whereas APSA can even protect non American scholars. Hence, the difference in this aspect is the depth of coverage offered by the two codes. The two codes have different approaches in implementing and prescribing public administrators accountability. The New York State Public Officers Law Code of Ethics regulates behavior through a punishment process whereby failure to abide by a certain code results in a form of punishment or penalty. The APSA however, is more authoritative and guiding and has fewer elements of threat or negative

Booker T. Washington Essay Example for Free

Booker T. Washington Essay Booker T. Washington was born on plantation in Franklin Country, Virginia, on April 5, 1856. After the Civil War, his families moved to Malden, West Virginia, were Booker T. Washington worked in the coal mines and salt Furnaces, and a house servant. Washington mom and he were determined for him to go to school. During four years, he was a student and attending Hampton Normal and Agricultural Institute of higher learning for Africans American and later became Hampton University. When he was going to school he did not have a last name so he invented the last name of Washington when he was in school and the other children were giving their surnames. After Washington graduated from Hampton Normal, he pursued a career a career as an educator. He was a teacher for two years in Malden and then he furthered his education at Washington D.C Wayland Seminary. Then he accepted a position at Hampton Normal. He was the head of industrial training of 75 Native American. He was named principal of Hampton Normal which later became Tuskegee University. On September 18, 1895, Washington made a historic speech in Atlanta, Georgia. In what was known as the (Atlanta Compromise Speech) Washington encouraged African American to accept lower social status for the time being and to focus instead on advancement through career training, education, and economic independence. Washingtons health began to become worse in his later years as he was traveling and working a lot. He failed while he was in New York City, and he was brought back home to Tuskegee, and he died there on November 14, 1915 when he was 59 years old. The cause of his death was unknown, but it was likely from arteriosclerosis and nervous exhaustion. His body was buried on the campus of Tuskegee University near University Chapel. In March of 2006, looking into his medical records showed that he died from hypertension with blood pressure that was two times higher than a normal blood pressure.

Design Of A Sulfuric Acid Production Plant Engineering Essay

Design Of A Sulfuric Acid Production Plant Engineering Essay This project is prepared according to the requirements of chemical engineering department, and its also a preliminary study of sulfuric acid production plant. The project begins with chapter one which includes introduction, definition of sulfuric acid and shows the main uses of sulfuric acid which have made it an important chemical in the world, followed by chapter two which talks about literature, market survey and the history and current processes for production the sulfuric acid also it gives small glimpse of the prices trends of the raw material and product. That is followed by description for various processes to produce sulfuric acid in chapter three, which ends with the selection of the best process which is the double contact process; the description and flow sheet of the selected process are discussed in chapter four. Material and energy balance results are listed in chapter five and the location of the plant is selected in chapter six by comparing different locations, and the best location for the plant (as its set in this report) is Aqaba city. . Finally, material and energy balance details are discussed in the appendix, that includes the used charts and references. CHAPTER ONE INTRODUCTION 1.1 Definition Sulfuric acid is a strong mineral acid with the molecular formula H2SO4. It is a clear, colorless, odorless, viscous liquid that is very corrosive. It is soluble in water at all concentrations. Sulfuric acid has many applications, and is one of the top products of the chemical industry. There are another names for sulfuric acid, it is sometimes called oil of vitriol.1 Its chemical formula is Figure (1.1.1): Sulfuric Acid Formula1 1.2 Physical and Chemical properties This table shows the main chemical and physical properties of sulfuric acid Sulfuric acid IUPAC Oil of vitriol Other name H2O4S Molecular formula 98.08 g molà ¢Ã‹â€ Ã¢â‚¬â„¢1 Molar mass Clear, colorless, odorless liquid Appearances 1.84 g/cm3, liquid Density 10  Ã‚ °C, 283  K, 50  Ã‚ °F Melting point 337  Ã‚ °C, 610  K, 639  Ã‚ °F Boiling point Miscible Solubility in water à ¢Ã‹â€ Ã¢â‚¬â„¢3 Acidity(pka) pungent odor Odor Non-flammable Flash point 26.7 cP (20  °C) Viscosity 0.3 Ph Table (1.2.1): physical properties1 1.3 Application and Uses Sulfuric acid is a very important chemical commodity, and indeed, a nations sulfuric acid production is a good indicator of its industrial strength. It is used as electrolyte in lead-acid batteries (accumulators) . It is important in the production of fertilizers such as ammonium sulfate (sulfate of ammonia), (NH4)2SO4, and superphosphate, Ca(H2PO4)2, which is formed when rock phosphate is treated with sulfuric acid. It is used to remove oxides from iron and steel before galvanising or electroplating . Concentrated sulfuric acid is used as a dehydrating agent, that is, to remove water, since it has a tendency to form hydrates such as H2SO4.H2O, H2SO4.2H2O. Sulfuric acid is used in the production of nitroglycerine, an inorganic ester organic nitrate, which is used as an explosive. It is used in petroleum refining to wash impurities out of gasoline and other refinery products. It is used in manufacturing of hydrochloric acid, nitric acid, phosphoric acid, ether, plastics, metal sulfates, cellophane, dyes, drugs, perfumes, disinfectants and even glue.1 This chart shows the distribution of using sulfuric acid Figure (1.3.1): Sulfuric Acid Distribution.1 Specification of raw materials sulfur, S, 16 Name, symbol, number 32.065g ·molà ¢Ã‹â€ Ã¢â‚¬â„¢1 Standard atomic weight Yellow colored lumps, crystals, powder, or formed shape Appearances Lumps 75-115 lbs./ft3 Powder 33-80 lbs./ft3 Bulk Density 388.36  K,à ¢Ã¢â€š ¬Ã¢â‚¬Å¡115.21  Ã‚ °C,à ¢Ã¢â€š ¬Ã¢â‚¬Å¡239.38  Ã‚ °F Melting point 717.8  K,à ¢Ã¢â€š ¬Ã¢â‚¬Å¡444.6  Ã‚ °C,à ¢Ã¢â€š ¬Ã¢â‚¬Å¡832.3  Ã‚ °F Boiling point Insoluble Solubility In Water Solid Physical State 1.819 g ·cmà ¢Ã‹â€ Ã¢â‚¬â„¢3 Liquid density at maps. Table (1.3.1): Physical Chemical Properties of Sulfur.1 CHAPTER TWO LITERATURE AND MARKET SURVEY 2.1 History and Current processes The discovery of sulfuric acid is credited to the 8th century chemist and alchemist, Jabir ibn Hayyan (Geber). The acid was later studied by 9th century Persian physician and alchemist Ibn Zakariya al-Razi (Rhazes), who obtained the substance by dry distillation of minerals including iron(II) sulfate heptahydrate, FeSO4 ·7H2O, and copper(II) sulfate pentahydrate, CuSO4 ·5H2O. When heated, these compounds decompose to iron(II) oxide and copper(II) oxide, respectively, giving off water and sulfur trioxide, which combine to produce a dilute solution of sulfuric acid. 1 This method was popularized in Europe through translations of Arabic and Persian treatises, as well as books by European alchemists, such as the 13th-century German Albertus Magnus.1 There are two major processes (lead chamber and contact) for production of sulfuric acid and it is available commercially in a number of grades and concentrations. The lead chamber process, the older of the two processes, is used to produce much of the acid used to make fertilizers; it produces a relatively dilute acid (62%-78% H2SO4). The contact process produces a purer, more concentrated acid but requires purer raw materials and the use of expensive catalysts. n both processes sulfur dioxide is oxidized and dissolved in water. The sulfur dioxide is obtained by burning sulfur, by burning pyrites (iron sulfides), by roasting nonferrous sulfide ores preparatory to smelting, or by burning hydrogen sulfide gas. Some sulfuric acid is also made from ferrous sulfate waste solutions from pickling iron and steel and from waste acid sludge from oil refineries. 1 2.2 Supply and Demand This table shows the production rates of sulfuric acid (in metric tones) in some countries at different years. Production of sulfuric acid in metric tones Year country 1994 1997 2000 2006 France 2227 2242 2269 1755 Germany 3380 3496 4898 4595 Greece 360 675 688 815 Italy 1228 1590 1043 1616 Spain 2348 2810 2418 3500 United kingdom 1225 1205 1058 447 Sweden 518 630 629 1010 Table (2.2.1): Production Rates of Sulfuric Acid.3 This table shows the production and sales amounts of sulfuric acid and the consumption rate of sulfur in Jordan from 2000 to 2005, these amounts in (ton/year). Sulfur consumption (ton/tear) Ù Sulfuric acid Year Sales (ton/year) Production (ton/year) 370925 43824 1108605 2000 309816 46614 919548 2001 351011 43307 1055208 2002 265865 51445 961208 2003 364301 49661 1102899 2004 346345 48323 1046540 2005 Table (2.2.2)Jordan Production, Sales and Raw Material Consumption.5 2.3 Prices trends of the raw material and product The global sulfuric acid market experienced an unprecedented rise and fall in pricing between fall 2007 and spring 2009. Consumption of sulfuric acid for fertilizers fell steeply in the second half of 2008 due to the collapse in the global economy. The second half of 2009 is expected to experience almost flat to slightly positive growth, anticipating the improvement in market conditions in 2010. Trade is expected to fall globally, except for Southeast Asia, which would continue to depend on imports. As of early spring 2009, the market is continuing to deteriorate as the supply shortage situation has been replaced by product oversupply in almost all regions. And the world sulfuric acid supply trends are shown in the following chart. Figure (2.3.1): World Sulfuric Acid Supply.2 CHAPTER THREE PROCESS SELECTION Process Selection Sulfuric acid is an important raw material used in many industrial processes, such as phosphate fertilizer production and to a much lesser extent for nitrogen and potassium fertilizers, sulfuric acid is produced by catalytic oxidation of sulfur dioxide to sulfur trioxide, which is subsequently absorbed in water to form sulfuric acid. There are no major variations of commercial interests on this mentioned chemistry. There are alternatives as to source of Sulfur dioxide and method of conversion to sulfur trioxide. The two most common methods for the conversion of sulfur dioxide to sulfuric acid are: 1. Lead Chamber Process. 2. Contact Process 3.1 Lead Chamber Process This is an old process and was introduced in Europe in near the middle of 18th century, its used to produce much of the acid used to make fertilizers; it produces a- relatively dilute acid (62%-78% H2SO4).The classic lead chamber process consists of three stages: Glover tower, lead chambers and Guy-Lussac Tower. In this method hot sulfuric dioxide gas enters the bottom of the reactor called a Glover tower where it is washed with nitrous vitriol (sulfuric acid with nitric oxide, NO, and nitrogen dioxide, NO2, dissolved in it) and mixed with nitric oxide and nitrogen dioxide gases. The Glover tower serves two functions: concentration of the chamber acid and stripping of nitrogen oxides from the liquid to the gas. Concentration of the chamber acid (62% to 68% H2SO4) is achieved by the hot gases entering the tower which evaporate water from the acid. Some of the sulfur dioxide is oxidized to sulfur trioxide and dissolved in the acid wash to form tower acid or Glover acid (about 78% H2SO4). The dissolved nitrogen oxides are stripped from the acid and carried with the gas out of the Glover tower into the lead chambers. From the acid tower a mixture of gases (including sulfur dioxide and trioxide, nitrogen oxides, nitrogen, oxygen, and steam) is transferred to a lead-lined chamber where it is reacted with more water. Sulfuric acid is formed by a complex series of reactions; it condenses on the walls and collects on the floor of the chamber. There may be from three to twelve chambers in a series. The acid produced in the chambers, often called chamber acid or fertilizer acid, contains 62% to 68% H2SO4. After the gases have passed through the chambers they are passed into a reactor called the Gay-Lussac tower where they are washed with cooled concentrated acid (from the acid tower); the nitrogen oxides and unreacted sulfur dioxide dissolve in the acid to form the nitrous vitriol used in the acid tower. Remaining waste gases are usually discharged into the atmosphere. Product acid at a concentration of 78% H2SO4  is drawn from the cooled acid stream that is circulated from the Glover tower to the Guy-Lussac tower.   Nitrogen losses are made up with nitric acid which is added to the Glover tower. The major disadvantage includes the limitations in throughput, quality and concentration of the acid produced, also the environmental pollution. Figure (3.1.1): Typical process flow sheet for the lead Chamber. 3.2 Contact Process Because of economic reasons Contact plants are widely used compared to the lead plants, they are classified according to the raw materials charged to them: elemental Sulfur burning, spent sulfuric acid and hydrogen sulfide burning, and metal sulfide ores and smelter gas burning. The contributions from these plants to the total acid production are 81, 8, and 11 percent, respectively. The contact process incorporates three basic operations (stages), each of which corresponds to a distinct chemical reaction. First, elemental sulfur is received in a solid form containing various impurities. The sulfur is melted in the sulfur melter in the presence of hydrated lime which neutralizes any acidity present in the sulfur. This neutralization prevents problems of acid corrosion which would otherwise be encountered. Heat for the melting of the sulfur is supplied from steam coils. The molten sulfur is kept agitated to improve heat transfer, to prevent solids settling on the bottom of the sulfur pits and to prevent a crust forming on top. The dirty sulfur is filtered to remove impurities present and after filtering is transferred to the clean sulfur pit where it is kept molten until it is pumped to the burner. Molten sulfur at a temperature of 130 °C is sprayed into the burner in the presence of warm, dry air. The sulfur burns, forming sulfur dioxide S + O2 â‚ ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚   SO2 à ¢Ã‹â€ Ã¢â‚¬  H = -300 kJ mol-1 The resulting sulfur dioxide is fed to a process unit called a converter, where it is catalytically oxidized to sulfur trioxide (SO3): 2SO2 + O2 â‚ ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  2SO3 ΆH = -100 kJ mol-1 Its apparent that the equation gives a decrease in volume; this reaction would be aided by pressure. High conversions are however, obtainable with catalysts at 400 to 500oC with a small excess of oxygen and the use of pressure. The available methods to maximize the formation of SO3: As this is an exothermic process, a decrease in temperature by removal of the heat will favour the formation of SO3. Increased oxygen concentration. SO3 removal (as in the case of the double absorption process). Increased pressure. Catalyst selection, to reduce the working temperature (equilibrium). Longer reaction time. In the contact processes, the sulfur dioxide is converted to sulfur trioxide by the use of metal oxide catalyst, the characteristics of the used catalyst are: Porous carrier having large surface area, controlled pore size and resistance to process gases at high temperature; in pellet form if used in fixed bed and powdered form if used for fluidized bed. Ex- Alumina, silica gel, zeolites. Active catalytic agent: Preparations are generally kept secret for the competitive reasons but they usually consist of adding water soluble compounds to gels or porous substrates and firing at temperature below the sintering point. Promoter: Alkali and/or metallic compounds added in trace amounts to enhance the activity of the catalytic agent. A catalyst, vanadium pentoxide (V2O5) is used to increase the reaction rate because its relatively immune to poisons, also because of its low initial investment and only 5% replacement per year. It is only effective above its melting point of 400  °C. The greatest conversion of SO2 to SO3 is reached by passing the gas over several catalyst beds, cooling the gas between each pass so that the reaction temperature remains between 400 and 500  °C. As can be seen the figure. The disadvantages of using the V2O5 catalyst are that it must use dilute SO2 input (7-10%), as a catalyst it is less active and requires high oxygen or sulfur dioxide to give economic conversions also it requires larger converters and thus higher initial investment. Finally, the sulfur trioxide is absorbed in to very concentrated sulfuric acid (a 98-99 percent solution of H2SO4 in water), This operation takes place in the absorbing tower where the gas travels up through the tower, counter-current to the acid falling from the top of the tower producing a thick fuming liquid called oleum, the oleum is mixed carefully with water to avoid producing fine mist of sulfuric acid that is difficult to condense and could escape to pollute the air, the sulfur trioxide in the oleum reacts with the water as follows: SO3 + H2O â‚ ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  H2SO4 à ¢Ã‹â€ Ã¢â‚¬  H = -200 kJ mol-1 It is clear that the reaction is exothermic and the absorbing sulfuric acid has to be cooled continuously; the heat is available at a relatively low temperature and is not worth recovering. The efficiency of the absorption step is related to : The H2SO4 concentration of the absorbing liquid. (98.5 99.5%). The temperature range of the liquid (normally 70 -120 0C). The technique of the acid distribution. The raw gas humidity (mist passes the absorption equipment). The mist filter. The temperature of incoming gas. The co-current or countercurrent character of the gas stream in the absorbing liquid. Main disadvantages of the contact process are that concentrated acid (98%) of high purity can be produced directly and that compact plants of quite high capacity have now become rather common place. The contact process can be applied in different techniques; three of those techniques are described in the following sections 3.2.1 Single contact / single absorption process After purification and drying, the SO2 is converted to SO3 using a series of four catalyst beds, containing alkali and V2O5. Afterwards, the SO3 is absorbed in concentrated sulfuric acid and, if necessary, an oleum absorber is installed upstream. SO3 reacts with the water contained in the absorber acid to yield H2SO4. The absorber acid is kept at the desired concentration of approximately 99% w/w by addition of water or dilute H2SO4. The single contact/single absorption process is generally used for gases with an SO2 Content from 3 6 %. New single contact plants are built only for inlet gases with substantial fluctuation of the SO2 content. The investment cost of this technique is low compared to the investment cost of double contact plants. Figure (3.2.1.1): Typical process flow sheet for a single catalysis plant. 3.2.2 Double Contact/ Double Absorption Process The double contact process was implemented to develop the single contact/single absorption process. In this process a primary SO2 conversion of 85 95 % is achieved in the first catalysis stage of the converter before entry into an intermediate absorber, depending on the arrangement of the converter beds and the contact time. What makes the double contact/double absorption process more advantageous is that its ability to feed gases with higher SO2 concentrations than would be possible with the single catalysis process. Which leads to smaller gas volumes and therefore smaller equipment with comparable production capacities. This results in a considerably higher conversion rate, if the residual gas is passed through the following converter beds (usually one or two). The SO3 which is formed in the second catalysis stage is absorbed in the final absorber. In general the process uses gases with an SO2 content of 10 t o11 %. The inlet gas temperature is about 4000C. Gases with lower temperatures require reheating from 50 to 4000C. This is usually carried out with recovered heats from the conversion process. Operating the double contact process at an elevated pressure of 5 bar increases the conversion rate by shifting the conversion equilibrium and favouring the formation of SO3. The disadvantages are higher electricity consumption and, at the same time, less steam production. Higher NOx emissions are caused by higher sulfur combustion temperatures (18000C), but savings of 10 -17 % on investment costs are gained. Figure 3.2.2.1: Typical process flow sheet for a sulfur burning double catalysis plant. 3.2.3 Wet catalysis process The wet catalysis process is applicable to wet SO2 gases. The potential for the formation of sulfuric acid mist might require tail gas treatment. Wet SO2 gases (eg. from the burning of H2S gases or from the catalytic conversion of H2S gases) are directly supplied into the contact tower without previous drying. SO3 formed by the catalytic conversion immediately reacts with the moisture of the gases, thereby forming the acetic acid. The sulfuric acid is condensed in a condenser installed after the contact tower. Factors Sulfuric Acid Production By Lead Chamber process Sulfuric Acid Production By single contact/single absorption process Sulfuric Acid Production By double contact/double absorption process Sulfuric Acid Production By Wet Catalysis process Health and safety hazards involved Less safe, waste gases are discharged to the atmosphere Less amount of SO3 is absorbed so the rest is discharged to the atmosphere A larger amount of SO3 is absorbed A larger amount of SO3 is absorbed Operating cost High operating cost Less operating The least operating cost Less operating cost Raw material SO2, NO, NO2, O2, H2O. Melted sulfur, O2, SO2, SO3. Melted sulfur, H2O, O2, SO2, SO3. Wet SO2 gases, H2S, O2, SO3. Waste products and by products Exhaust gases are discharged to the atmosphere Large amounts of SO2 gas are discharged to the atmosphere Less amounts of SO2 gas are discharged to the atmosphere, less heat released after each successive catalyst bed. A larger amount of SO3 is absorbed Equipment Acid Tower (Glover Tower), Lead Chambers, Reactor (Gay-lussac Tower) Air dryer, burner, waste heat boiler, converter, single absorption column. Air dryer, burner, waste heat boiler, converter, intermediate and external absorption column. Burner, convertor, acid tower. Yield Yields 78% H2SO4 New plants achieve 98 to99 % conversion rates Yields about 98% Yields 70 to 80 % H2SO4   Environmental pollution More gases are discharged to the atmosphere More gases discharged to the atmosphere Less gases discharged to the atmosphere More gases are discharger to the atmosphere Purity of products Low purity Low purity High purity Low purity Table (3.2.1): Process selection Factors Sulfuric Acid Production By Lead Chamber process Sulfuric Acid Production By single contact/single absorption process Sulfuric Acid Production By double contact/double absorption process Sulfuric Acid Production By Wet Catalysis process Health and safety hazards involved 5 5 5 3 Operating cost 6 4 7 5 Raw material 6 5 7 5 Waste products and by products 6 6 7 5 Equipment 7 5 8 6 Yield 5 6 7 9 Environmental pollution 5 5 6 4 Purity of products 6 5 7 9 Total (80) 46 41 54 46 Table (3.2.2): Process Selection According to the discussion and the data presented above we choose the Double Contact/Double Absorption process. CHAPTER FOUR PROCESS DISCRIPTION 4.1 Production of H2SO4 by double contact process The process begins in the burner, in which the melt sulfur is pumped to the burner where it is burnt in an excess of dry air. The gas exiting the burner is maintained at (8 9%v/v) sulfur dioxide and approximately 830 °C due to the heat produced by the exothermic reaction. Sulfurs on burning gives about one third of heat combustion of coal ,and this heat raises the temperature of combustion gases roughly in accordance with the figure (4.1.1) as shown. Figure (4.1.1): Theoretical Flame Temperature.8 This heat is high in temperature and there is plenty of it, consequently it is worth utilizing and the hot gases are led across pipes through which the water passes. The water is heated, steam is raised and the gases are cooled. The sulfur dioxide/air gas mixture is then passed through the stream to converter. The sulfur dioxide is converted to sulfur trioxide by reacting with oxygen over a catalyst. This reaction is described by the equation: 2SO2 + O2 â‚ ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  2SO3 ΆH = -100 kJ mol-1 This reaction occurs in the converter, a four-stage reaction vessel with each stage consisting of a solid catalyst bed through which the gas is passed. The catalyst used is vanadium pentoxide (V2O5), and potassium sulphate dispersed on a silica base which forms a porous support, giving a large surface area for reaction. This reaction is exothermic and its equilibrium constant decreases with increasing temperature (Le Chatelier.s Principle). Figure (4.1.2) shows the percentage conversion of SO2 to SO3 that would be reached at an SO2 concentration of 8% v/v and a range of gas temperatures. However, the reaction rate is also temperature dependent, so that if the temperature becomes too low the equilibrium point will not be reached. In practice, the gas temperature must be maintained between (400 500 °C) to maintain a high reaction rate and also high conversion equilibrium. As the reaction is exothermic, heat is generated across each of the catalyst beds. This heat must be removed between each stage to maintain the optimum reaction temperature into the following stage. The temperature rise through each catalyst bed and the inter-stage cooling is shown in Figure (4.1.2). Figure (4.1.2): The Temperature Rise Through Beds.7 The gas after passing through three catalyst bed goes to the first absorption tower where the Sulfur trioxide is removed. The gas is then reheated to about 420 C, passed through the fourth catalyst bed, then cooled and sent to a second absorption tower. The gas mixture goes to the first and second absorption tower, a packed tower where SO3 is absorbed into a counter-current flow of 98 99% sulfuric acid. The overall reaction can be described by the following equation, where sulfur trioxide reacts with the free water to produce sulfuric acid: SO3 + H2O â‚ ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  Ã¢â€š ¬Ã‚  H2SO4 à ¢Ã‹â€ Ã¢â‚¬  H = -200 kJ mol-1 The circulating sulfuric acid must be maintained at about 98% concentration and temperature is controlled in the desired rang of (70 °C_90 °C) to maximize the absorption efficiency. The acid strength is important because the vapor pressure of sulfur trioxide above sulfuric acid is at a minimum at an acid strength of 98% (see Figure (4.1. 3)). At higher concentrations the increased vapor pressure is caused by SO3 and at lower concentrations the water vapor pressure increases sharply and the resultant acid mist is not readily re-absorbed and escapes to the atmosphere. A stream of sulfuric acid is continuously bled off and cooled through a plate heat exchanger before being passed into the storage tanks. Figure (4.1.3): Relation Between Vapor Pressure and Concentration.7 Figure (4.1.4) : Flow Sheet CHAPTER FIVE ENERGY AND MASS BALANCE 5.1 MASS BALANCE *Drier: Components Amount % H20 1.27 1.3 O2 21.12 23 N2 69.4 75.7 Temperature 25C pressure 1 atm M1 M2 Components Amount % H2SO4 39.4 98 H2O 0.8 2 Temperature 150C pressure 1 atm M3 Components Amount % O2 21.12 23.3 N2 69.4 76.7 Temperature 25C pressure 1 atm M4 Components Amount % H2SO4 39.42 95 H2O 2.1 5 Temperature 150C pressure 1 atm *Burner: M3 Components Amount % O2 21.12 23.3 N2 69.4 76.7 Temperature 26C pressure 1 atm M5 Components Amount % S 3.76 100 Components Amount % SO2 28.16 29 O2 7.04 7 N2 69.4 64 Temperature 830C pressure 1 atm   M6 *Converter: M6 Components Amount % SO2 28.16 29 O2 7.04 7 N2 69.4 64 Temperature 400C pressure 1 atm M7 Components Amount % O2 2.11 2 N2 69.44 66 SO2 8.45 8 SO3 24.64 24 Temperature 450 pressure 1 atm M8 Components Amount % SO2 26.72 26 O2 1.69 1.6 N2 69.44 66.4 SO3 26.72 26 Temperature 450 pressure 1 atm M9 Components Amount % SO2 0.314 6 O2 0.0768 1.5 N2 3.47 66.5 SO3 1.36 26 Temperature 450 pressure 1 atm M10 Components Amount % SO2 0.314 6 O2 0.0768 1.5 N2 3.47 66.5 SO3 1.36 26 Temperature 450 pressure 1 atm M11 Components Amount % SO2 6.08 6 O2 1.54 6 N2 65.97 66.5 SO3 25.84 26 Temperature

Influence of Location on Ecology Views

Influence of Location on Ecology Views City, rural and Costal backgrounds: Does Location Influence our outlook on ecology? Rebecca Anne Chesser Summary Conservation has gradually gone from being an issue to a select few, to now a global phenomenon. The widespread harmful aspects of human activity on the biophysical environment have reached catastrophic levels. The amount of greenhouse gas in the atmosphere is already above the threshold that can potentially cause dangerous climate change. â€Å"We are already at risk, its not next year or next decade, its now. Report from the UN Office for the Coordination of Humanitarian Affairs (OCHA). Although the damage up until now is largely irreversible, conservation is the key to limiting any further damage to the global environment. If these issues are not urgently addressed the list of animals on the endangered species list will exponentially increase at an alarming rate. The future welfare of the planet, flora and fauna depends on how the world responds to the current global crisis. Human beings are guilty of robbing the world of its natural resources, impacting ecosystems and habitats o f wild animals. Re-education of how we manage the earth and its resources, and the animals and planets which live in it, is vital for future generations. With this in mind, this study will look to see if location, either urban, rural or coastal, has a direct effect on one’s knowledge and understanding of the natural world around them, and whether or not this impacts their attitudes towards conservation and animal welfare issues. This will hopefully make way for future research in order to raise awareness of what communities are more likely to be lax about environmental issues, and could benefit from more information/conservation schemes to improve the world in which we inhabit. Research Background Much of the previous research in this area has focused largely on cross-cultural studies, which observed the relation between how people conceptualise nature and how they act in it. â€Å"Tragedy of the commons† is a theory proposed by Garrett Hardin, according to which individuals, acting independently and rationally according to each ones self-interest, behave contrary to the whole groups long-term best interests by depleting some common resource (Hardin, 1968). The concept is often cited in connection with sustainable development, meshing economic growth and environmental protection, as well as in the debate over global warming. Commons can include the atmosphere, oceans, rivers, fish stocks, national parks and any other shared resource. The tragedy of the commons occurs when individuals neglect the well-being of society in the pursuit of personal gain and thus it is this attitude, which varies largely across cultures, which has become one of the most central, yet diverse, problems in environmental welfare decision making. A number of researchers have however noted many examples in which commons have been and are being successfully managed (Atran, 1986; Berkes, Feeny, McCay, Acheson, 1989; Deitz, Ostrom, Stern, 2003; Ostrom, 1999). Key factors in these successes include a closed-access system and having social institutions in place to monitor use and punish overusers. This again shows that depending on the measures in a particular location, the outcome of people’s attitudes towards conservation and ecology can be influenced. Lo ´pez, et al, (1997) found that US undergraduates and Itza’ Maya of Guatemala showed a different pattern of responding on a category-based inductive reasoning task involving mammals, indicating a clear difference in knowledge and understanding the essential nature and underlying properties of animals ranging across two very different cultures. In a two part study carried out Schultz, results showed that participants instructed to take the perspective of an animal being harmed by pollution scored significantly higher in biospheric environmental concerns than participants instructed to remain objective (Schultz 2000). This implies that concern for environmental issues is fundamentally linked to the degree to which people view themselves as part of the natural environment. This implies a potential link between location and knowledge of nature, and levels of concern for both environmental and animal welfare which is what this future investigation aims to distinguish. Hypothesis In relation to the previous research carried out, which illustrated that there is a link between location and understanding the essential nature and underlying properties of plants and animals, it will be expected that [1] urban dwellers will have less experience of country, shore and sea life and will therefore have a lesser knowledge of the essential nature- and the underlying properties of both plants and animals, meaning they will score less than country and coastal dwellers on the knowledge of nature section of the questionnaire. [2] This will therefore lead to urban dwellers being less enthusiastic about conservation issues, due to rural/coastal dwellers witnessing, first hand, the effects of environmental issues damaging their surrounding areas more obviously than in less green urban areas- (oil covered birds, woodlands destroyed etc). [3] Urban dwellers will also be less passionate regarding issues to do with the treatment of animals, due to reduced contact with them, and mor e physical distance from many animals, compared to living in the countryside or coastally, meaning they will also score less on both attitudes towards conservation of the environment and attitudes towards the treatment of animals sections. The null hypothesis would be that participant’s location does not directly impact their knowledge of the essential nature and underlying properties of plants and animals, nor does it directly influence their attitudes towards conservation and animal welfare. Method Equipment Participants will be briefed and a consent form will be completed online. Participants will then be asked to fill in an online questionnaire which should take no longer than half an hour to complete. The software platform for this online questionnaire will be TypeForm. Participants Participants will most likely be both male and female university and college students around the age of 18-25, with varying races and socio-economically backgrounds. Participants will be mostly self-selected to participate; having chosen this study to fulfil a research participation requirement scheme (STREP) enforced By Heriot Watt University. The questionnaire may also be sent to several other students at different university and college campuses in and around Edinburgh. Data Collection Data will be collected using an online survey. The questionnaire will be organised to ensure that questions are grouped into 4 categories. Participants will receive a score for each section- [1] Location of the participant- including previous locations, location preferences, how often they visit coastal/country areas if they arent coastal or country dwellers etc [2] Attitudes towards conservation of the planet- such as recycling, which environmental issues they are concerned with, how green they consider their lifestyle to be etc [3] Attitudes towards how animals are treated- views on vegetarianism, hunting, animal testing, free range, animals as pets, animals in captivity etc [4] *Still developing a way in which I can assess participants knowledge of essential nature- and the underlying properties of both plants and animalsà ¢Ã¢â€š ¬Ã¢â‚¬ ¹* Variables Due to this study being observational, no manipulation of variables has occurred. The predictor variable for this study will be location of the participants, and the three outcome variables will be [1] knowledge of the essential nature and underlying properties of plants and animals, [2] attitudes towards conservation, [3] attitudes towards animal welfare. Measures No ‘scales’ or ‘measures’ exist for either the predictor variable nor the outcome variables of this study, therefore the questionnaire will be tailored to attain sufficient information from each section to allow a score to be allocated to each participant for each of the four sections. Each section will have between ten and fifteen questions. Firstly the questions will be assessing the location of the participant- most importantly whether they consider themselves to live in an urban, country, coastal or suburban area. Also included in this section will be questions to do with the length of time the participant has lived in Great Britain, how often the participant engages with the outdoors, if they have any access to parks or country walks nearby, if they have a job that involves working outdoors for extended periods of time, and also basic factors such as gender, age and ethnicity. Secondly, questions will be asked about attitudes towards energy conservation . This encompasses recycling, travel, lifestyle choices etc, which all could be seen to negatively impact global warming and conservation. Thirdly, questions about attitudes towards the value of animals will be asked- dietary choices, opinions on animal testing, hunting sports and keeping animals in captivity. The fourth element of the questionnaire is going to be a picture match (similar to that previously conducted in â€Å"Cultural Dià ¯Ã‚ ¬Ã¢â€š ¬erences in Children’s Ecological Reasoning and Psychological Closeness to Nature: Evidence from Menominee and European American Children† (Unswortha et al). TypeForm Software allows a picture match, so 4 pictures will be presented, two will be matched somehow- ie. Same diet, both give birth to live young, both live underground, both young are called ‘kits’ etc, the participant scores 1 point for every pair correctly selected. There will be other multiple choice questions in this section to further assess the participant’s knowledge and understanding of nature, animals, plants and the planet. Again, the point scoring will continue- 1 point for every correct answer. For all questions there will also be an option to pass on the question, this will be in place to minimise participants randomly guessing, or cheati ng in order to avoid feeling embarrassed by selecting the wrong answers. Sections will be scored using a point system: for example one question could be â€Å"Which do you use more- bath or shower†- due to a shower conserving water, if this answer was selected the participant would receive 2 points, if they selected bath they would receive 1 point and so on. Participants will end up with 4 scores- one for location, one for conservation, one for animal treatment and one for knowledge of nature. ie. Rural participant may score 32 out of a possible 50 for conservation, whereas an urban participant may only score 19. Procedure Participants who chose to take part in this study by either signing up on the STREP system or through email, will be sent a brief if the study and a consent form. The brief will outline what the study will entail and stated that the participants will remain anonymous, with the exception of providing information regarding their age and sex, and will explain that participants have the option to withdraw from the study and ask for the data t not be used at any point. Once the consent form is signed, the participants will be asked to complete the online questionnaire. The participants will then be given a debriefing and, if applicable, be awarded their STREP credits. Analysis The data will be analysed using SPSS. (***Unsure which tests to use***) Limitations There could be many problems and limitations to this study. With time and funds restrained sample size will be limited and not representative of the entire population raising questions of the validity and ability to generalise the findings of the study. Many of the students asked to fill out the question may answer the questions untruthfully or may ‘skip’ some questions, and some may drop out the study leading to missing data. References Atran, S. (1986). Hamula [patrican] organisation and masha’a [commons]  tenure in Palestine. Man, 21, 271–295 Atran, S., Medin, D. L. and Ross, N. (2005). The cultural mind: environmental decision making and cultural modeling within and across populations. Psychological Review 112, 744-776. Bailenson, J. N., Shum, M., Atran, S., Medin, D. L. and Coley, J. D. (2002). A bird’s eye view:  biological categorization and reasoning within and across cultures. Cognition 84, 1-53. Berkes, F., Feeny, D., McCay, B., Acheson, J. (1989, July 13). The  benefit of the commons. Nature, 340, 91–93. Dietz, T., Ostrom, E., Stern, P. (2003, December 12). The struggle to  govern the commons. Science, 302, 1907–1912. Gelman, S. A. (2003). The Essential Child. New York: Oxford University Press. Lo ´pez, A., Atran, S., Coley, J., Medin, D. (1997). The tree of life: universal and cultural features of folkbiological taxonomies and inductions. Cognitive Psychology, 32, 251–295 Ostrom, E. (1999). Coping with tragedies of the commons. Annual Review  of Political Science, 2, 493–535 Schultz, W. P. (2000). Empathizing with nature: The eà ¯Ã‚ ¬Ã¢â€š ¬ects of perspective taking on concern for environmental issues. Journal of Social Issues 56, 391-406. Walker, S. J. (1999). Culture, domain specificity and conceptual change: Natural kind and artefact  concepts. British Journal of Developmental Psychology, 17, 203-219. SCHOOL OF LIFE SCIENCES ETHICS COMMITTEE Application Form (click on the grey boxes to insert text) Section A: Project Overview Project Title: City, rural and Costal backgrounds: Does Location Influence our outlook on ecology? 2. Approval sought: Full approval Re-Submission In principle Contact Information 3. Responsible Staff Member: a) Name: Thusha Rajendran b) Telephone: +44 (0)131 451 3456 4. Investigator (if different from Responsible Staff Member): a) Name: b) Telephone: c) Email: 5. Duration of Proposed Project: February 2014 6. Anticipated Start Date: February 2014 7. Does the proposed research involve human participants or living animals in any way? Yes No Note. Involvement of human participants includes obtaining information from people through methods such as experiments, observation, surveys or interview, or any use of previously obtained personal data, or any use of human tissue samples. If your answer to Question 7 is ‘yes’ complete the rest of the form; if it is ‘no’, simply sign the declaration at the end of the form. 8. Please provide a brief summary of the proposed study (if possible, in less than 300 words. Include an overview of the design, variables, and other ethically-pertinent considerations). Feel free to attach a document if convenient. Section B: Administration Section C: Ethical Considerations Section D: Further Information Regarding Ethical Considerations If you responded ’No’ to any questions in section B, or ‘Yes’ to any questions in Section C, please provide further information, indicating how you would address this issue. Please be as comprehensive as possible, as this will speed the process for the referees and may avoid the need to contact you for further information or clarification.

Impressionist Paintings as Documents of Paris Capital of Modernity Ess

Impressionist Paintings as Documents of Paris Capital of Modernity Impressionist paintings can be considered documents of Paris capital of modernity to a great extent. This can be seen in their subjects, style of painting, and juxtaposition of the transitive and the eternal. The phrase Paris capital of modernity refers to the time in the second half of the nineteenth century when Paris was considered one of the most innovative cities in the world. This was largely a result of Haussmann’s renovation of the city between 1851 and 1869. A Prefect of Paris under Napoleon III, he transformed Paris into a city with wide streets, new shops and cafes, and a unified architecture. The visual appeal of the renovated city, along with other factors such as the high quality of the art schools, caused Impressionism to take off in Paris around this time (Thomson 2000: 19-20). Impressionist painters wanted to capture the present, not historical or idealistic scenes. For this reason, they painted boulevards, parks, train stations, and other places that were important to modern Paris life. Human figures were important subjects in their paintings, since one of the most effective ways to depict modern life is to show the people living in it. Beyond what they painted, Impressionists conveyed the modern city through their style of painting. They used techniques that emphasized that the scene was a moment in time. Many of their paintings were sketch-like, using thin but visible brushstrokes. They depicted light and shadows accurately, which often set the painting at a certain time of day. Also, they conveyed a sense of movement in their paintings, especially in human figures. These factors allow viewers to believe that the subjects of a painting w... ... considered documents of Paris capital of modernity to a great extent. Their subjects, style, and juxtaposition of the transitive and the eternal give effective depictions of life in Paris at the time. Impressionist paintings will stand alongside written documents as records of late nineteenth century Paris for years to come. Works Cited "Guide to Impressionism." National Gallery, London. Web. 12 Nov 2010. . "Kimbell Art Museum." Web. 12 Nov 2010. . "Luncheon of the Boating Party." The Phillips Collection. Web. 12 Nov 2010. . Belinda Thomson, Impressionism. Origins, Practice, Reception (Thames and Hudson, 2000). Impressionist Paintings as Documents of Paris Capital of Modernity Ess Impressionist Paintings as Documents of Paris Capital of Modernity Impressionist paintings can be considered documents of Paris capital of modernity to a great extent. This can be seen in their subjects, style of painting, and juxtaposition of the transitive and the eternal. The phrase Paris capital of modernity refers to the time in the second half of the nineteenth century when Paris was considered one of the most innovative cities in the world. This was largely a result of Haussmann’s renovation of the city between 1851 and 1869. A Prefect of Paris under Napoleon III, he transformed Paris into a city with wide streets, new shops and cafes, and a unified architecture. The visual appeal of the renovated city, along with other factors such as the high quality of the art schools, caused Impressionism to take off in Paris around this time (Thomson 2000: 19-20). Impressionist painters wanted to capture the present, not historical or idealistic scenes. For this reason, they painted boulevards, parks, train stations, and other places that were important to modern Paris life. Human figures were important subjects in their paintings, since one of the most effective ways to depict modern life is to show the people living in it. Beyond what they painted, Impressionists conveyed the modern city through their style of painting. They used techniques that emphasized that the scene was a moment in time. Many of their paintings were sketch-like, using thin but visible brushstrokes. They depicted light and shadows accurately, which often set the painting at a certain time of day. Also, they conveyed a sense of movement in their paintings, especially in human figures. These factors allow viewers to believe that the subjects of a painting w... ... considered documents of Paris capital of modernity to a great extent. Their subjects, style, and juxtaposition of the transitive and the eternal give effective depictions of life in Paris at the time. Impressionist paintings will stand alongside written documents as records of late nineteenth century Paris for years to come. Works Cited "Guide to Impressionism." National Gallery, London. Web. 12 Nov 2010. . "Kimbell Art Museum." Web. 12 Nov 2010. . "Luncheon of the Boating Party." The Phillips Collection. Web. 12 Nov 2010. . Belinda Thomson, Impressionism. Origins, Practice, Reception (Thames and Hudson, 2000).

Anti-semitism In The Merchant Of Venice :: Free Merchant of Venice Essays

Anti-Semitism in The Merchant of Venice It is my strong belief that the play, "The Merchant of Venice", should be taught in classes. If this play was banned from schools it would most certainly be a form of censorship. While minors rights are somewhat limited when it comes to this right, I think that even Minors should not be censored from this writing. The play teaches us about prejudice, and why it is wrong. People would see how everyone was hurt at one time or another by a prejudice, whether it was the Christians making fun of Shylock or Shylock showing his prejudice to the Christian's. I imagine that anyone watching, listening or reading this play would see how everyone was hurt, and would learn of racism's faulty basis's for judging someone. Some people would have you think that the play itself is racist, and provides a forum in which racism can grow and become only a bigger problem. I think that this is a flawed way of looking at it. I see the play as a confrontation of a modern day problem which society still faces. Rather than providing a forum for racism to grow, the play provides a forum for anti-racism discussion, if all proper steps are taken. When I say if all proper steps are taken, I am referring to having this play taught by a teacher, who can explain the plays meaning in it's fullest so that the students do not miss any important points from it. Another point that may have been missed when the presentation was made to the school board to ban the material from being taught inside the school system was that everyone is bad in the play. The Christians portrayal was just as bad as the Jewish man, Shylock's portrayal. In fact I think that the play gave a worse portrayal of the Christian's because they ended up being the most evil, through taking away everything that Shylock had and making him become Christian. While Shylock did want to kill someone, the punishment invoked on him was even worse. As you can see, there are many reasons why "The Merchant of Venice" should be taught in classrooms. A. Whitney Griswold said in a speech (1952), "Books won't stay banned. They won't burn. Ideas won't go to jail. In the long run of history, the censor and the inquisitor have always lost.

Rhone-Poulenc Rorer, Inc Case-Study

Almost every aspect of the complexity of the merger can be explained through Rhone-Poulenc’s financial constraints. RP’s motives to acquire Rorer were to create crucial capital for its own strategic entry into pharmaceuticals. RP could not buy Rorer either in cash or shares due to the following factors: First, RP had limited ability to pay with borrowed cash. The company was more levered than other firms in the industry. Rhone-Poulenc didn’t want to borrow all the cash because it would have affected in a negative way to its balance sheet despite the fact that it borrowed for the cash portion of the deal.Second, Rhone-Poulenc couldn’t pay with internally generated cash because, during the announcement time, RP was a net cash user in connection with its great capital spending requirements and the recession felling on chemicals markets. Third, RP could not pay with debt securities. It is logical that if the company was too highly levered to borrow and pay in cash, it was too highly levered to swap debt securities for shares. Fourth, Rhone-Poulenc could not pay with RP common shares or with cash raised from selling equity.A deal based on shares would not have been approved by old shareholders because the deal would have diluted the value of individual shares and it would have not been profitable because the RP’s management believed the company’s share price was undervalued. Rhone-Poulenc could not offer standard common stock because it didn’t have any, so it had to offer only nonvoting certificate of investment as a state-owned company as it was.2. In case of Rhone-Poulenc Rorer, Inc, the shareholders of Rorer received a CVR that enabled them to receive additional gains from the possible shortfall of the future stock price and to persuade the Rorer shareholders to continue as the minority equity investors in the Rhone-Poulenc Rorer, Inc. Rhone-Poulenc could not pay with RP common shares or with cash raised from selli ng equity. A deal based on shares would not have been approved by old shareholders because the deal would have diluted the value of individual shares and it would have not been profitable because the RP’s management believed the company’s share price was undervalued.Rhone-Poulenc could not offer standard common stock because it didn’t have any, so it had to offer only nonvoting certificate of investment as a state-owned company as it was. 3. The assumption is that RP is not going to use its right to extend the maturity of the CVRs, and they are thus expiring in July 31, 1993. We have used the binomial tree to value the CVRs as a put option. The value of a CVR is thus $5. 54, and the aggregate value is $231. 64 million. Secondly, we have calculated the value of the CVRs in August 1991, assuming this is the date when the case was written.In addition, I am still assuming that RP isn’t going to extend the maturity. I’ve used almost the same method as i n the previous calculation and the value of a CVR is $2. 78, and the aggregate value is thus $116. 34 million. 4. The investor can see the offering quite attractive. This is due to the fact that they now have limited their downside risks with the put option. This means the minority have an effective hedge against the possibility of failure of the upcoming merger. Rhone-Poulenc managed to entice all the shareholders of the acquired Rorer with its somewhat complicated three-stage transaction.The initial tender offer and giving the rights to control RP’s HPB was attractive enough for Rorer to accept the deal. The Contingent Value Rights gave the minority shareholders the rights they thought were valuable enough to close the deal. Rorer believed that the whole package was indeed worth of $36. 50 per share. Rorer benefited from the announcement of this deal and gained about $632 million in new value. However, RP’s non-voting common shares decreased 4. 4 percent, or $175 mil lion, in value. The fact is, all in all, that RP has a huge liability due to the CVRs.In the worst case scenario, the share price falls below $26. 00 and the liability would thus be ($49. 13 – $26. 00) * 41. 8 million = $966. 83 million, which is the maximum amount of RP’s liability. The maximum liability was perfectly hedged, providing RP a delta neutral position. Extra. RP would prefer the share price to stay higher than $49. 13 until 1993, and $53. 06 until 1994. This is because in these cases RP would not be obliged to pay CVR-holders the cash payments. Thus if the share price would be higher than $49. 13 in the expiration date of the CVRs, RP would not extend the maturity of the Contingent Value RightsIntroduction A merger between Rorer Group, Inc and the Human Pharmaceutical Business (HPB) of Rhone-Poulenc (RP) S. A. generated a major multinational pharmaceutical company, Rhone-Poulenc Rorer (RPR) on July 31, 1990. The expectations concerning takeover of Rorer ha d aroused in the late 1980s when the considerably low cash balance and rising level of debt seemed to slow down its strategy of growth by acquisitions. The rumors had reassurance in 1989 when Rorer made a bid to take over the pharmaceutical business of A. H. Robins and lost the opportunity.Just a short time after this, the $3. 2 billion merger of Rorer and RP was announced. A year later the company had shown rapid post-merger integration and initial synergy gains. RP had practically no position in the United States and Japan, but on the other hand it had a strong market share in some European Community markets. Thanks to Rorer’s U. S. connections, the new company ranked among the top three in Europe and had improved its position in the United States. Rorer’s Robert Cawthorn continued as RPR’s CEO and almost all the new senior executives came from Rhone-Poulenc.The markets expected RP to slowly take over the company because it owned 68% of RPR’s shares. Th e French government owned 100% of Rhone-Poulenc’s voting common stock. RP was the seventh largest chemical manufacturer in the world and it gave the minority shareholders a contingent value right (CVR) that promised to pay them on July 31, 1993, any shortfall between $49. 13 and the then prevailing stock price. Rorer Goup, Inc’s main factor in its growth strategy had been a program of acquisitions, because sales growth in the company’s existing product lines was characterized as mature.As usual, there were several skeptics associated to this merger. They were worried about the cultural integration and independence. The skeptics pointed out the company is French, yet the management team is mainly American, they have a American-style mission statement (â€Å"Our Mission is to become the BEST pharmaceutical company in the world by dedicating our resources, our talents, and our energies to help improve human health and the quality of life of people throughout the w orld†) and the lack of interest of the American executives to learn French. The market outlook for the industry wasn’t favorable for the company.The cost of new-product development in the industry was rising and yet the number of new drug applications worldwide had fallen. It was also predicted that the governments would get tougher on the cost of drugs in an effort to slow down rapidly rising health costs. Other risks to consider were patent expiration and competition from low-priced generic drug manufacturers and decreasing product life cycles. In turn, the world population was aging, analysts noted that computers and biotechnology were aiding new-product development and different analysts recommended to buy the RPR’s stock on the long term. . The $3. 2 billion merger was consummated in a three-stage transaction, by which Rhone-Poulenc obtained 68% of Rorer’s common stock (91. 6 shares), which was enough to permit Rhone-Poulenc to consolidate Rorerâ€⠄¢s results for financial reporting. First, Rhone-Poulenc would tender for 50. 1% (43. 2 million shares) of Rorer’s common stock for $36. 50 cash per share. Rhone-Poulenc increased its debt/capital ratio to 45% by borrowing the funds to finance the tender offer. The debt/capital ratio was considerably high compared to its competitors ratio of 20-30%.Second, Rorer assumed $265 million of RP debt (guaranteed by RP), made a $20 million cash payment to RP, and issued 48. 4 million new common shares to RP in exchange for RP’s HPB division. Analysts believed that Rorer’s bylaws would require at least 85% of all shares be voted in favor of the issuance of new shares and, more generally, of this entire transaction. Third, Rhone-Poulenc issued the 41. 8 million CVRs to the remaining minority shareholders in Rorer. A CVR entitled the holder to the right, at the end of three years (July 31, 1993) or four years, at RP’s option, to a cash payment of US$49. 13 (or $53. 6 if the payment were made at the end of four years) reduced by the higher of the value of the RPR share at that date or $26. Thus, if the value of the RPR share exceeded $49. 13 (or $53. 06), there would be no payment. The maximum amount of RP’s liability on December 31, 1990, was 5 165 million French francs at the date of the issuance of the rights. The maximum amount of RP’s liability at the date of issuance was hedged. Any changes in the value of the CVRs resulting from fluctuations in exchange rates, as well as the amortization of the cost of the hedge, were recorded directly into the consolidated equity of RP.The CVRs were quoted on the American Stock Exchange and traded independently of the shares of EPE, which were listed on the New York Stock Exchange. Rorer and RP jointly released its own estimate of the package value of CRV and minority share in RPR to be worth $36. 50 and thus equal to the price at which RP was offering for shares of RPR. Rorer’s in vestors responded positively to the merger arrangements. Rorer shares increased by 28% net of the changes in the Standard & Poor’s 500 index over the week during the week of the announcement. This gain equaled about $632 million in new value.Simultaneously, RP’s nonvoting common shares lost 4. 4% net of market during the announcement week, or about $175 million. Almost every aspect of the complexity of the merger can be explained through Rhone-Poulenc’s financial constraints. RP’s motives to acquire Rorer were to create crucial capital for its own strategic entry into pharmaceuticals. RP could not buy Rorer either in cash or shares due to the following factors: First, RP had limited ability to pay with borrowed cash. The company was more levered than other firms in the industry.Rhone-Poulenc didn’t want to borrow all the cash because it would have affected in a negative way to its balance sheet despite the fact that it borrowed for the cash portion of the deal. Second, Rhone-Poulenc couldn’t pay with internally generated cash because, during the announcement time, RP was a net cash user in connection with its great capital spending requirements and the recession felling on chemicals markets. Third, RP could not pay with debt securities. It is logical that if the company was too highly levered to borrow and pay in cash, it was too highly levered to swap debt securities for shares.Fourth, Rhone-Poulenc could not pay with RP common shares or with cash raised from selling equity. A deal based on shares would not have been approved by old shareholders because the deal would have diluted the value of individual shares and it would have not been profitable because the RP’s management believed the company’s share price was undervalued. Rhone-Poulenc could not offer standard common stock because it didn’t have any, so it had to offer only nonvoting certificate of investment as a state-owned company as it wa s.The form of the deal solved Rhone-Poulenc’s financial problems and it made possible for the firm to generate capital for its human pharmaceutical business and raise equity via obtaining Rorer’s shareholders to remain as minority equity investors in the Rhone-Poulenc Rorer, Inc. It would be natural to RP to want to issue equity for part of the deal but for the reasons mentioned above, it could not do so. 2. Contingent Value Right (CVR) is a type of right given to shareholders of an acquired company that ensures them to receive additional benefit if a specified event occurs.CVRs are handy tools that may help deal makers surmount challenging deal design problems. The use of CVRs is relatively rare, but they are useful when the seller company is seeking protection for the remaining minority shareholders who might be vulnerable to unfair treatment by the acquirer, the seller’s board may be concerned the buyer’s share price may not retain its value if the dea l’s projected synergies are not achieved, the integration is not smooth, or the buyer’s legacy business does not perform as expected.In case of Rhone-Poulenc Rorer, Inc, the shareholders of Rorer received a CVR that enabled them to receive additional gains from the possible shortfall of the future stock price and to persuade the Rorer shareholders to continue as the minority equity investors in the Rhone-Poulenc Rorer, Inc. Rhone-Poulenc could not pay with RP common shares or with cash raised from selling equity. A deal based on shares would not have been approved by old shareholders because the deal would have diluted the value of individual shares and it would have not been profitable because the RP’s management believed the company’s share price was undervalued.Rhone-Poulenc could not offer standard common stock because it didn’t have any, so it had to offer only nonvoting certificate of investment as a state-owned company as it was. Shareholder s selling their Rorer shares to Rhone-Poulenc were paid in three forms. They received totaling $1. 7 billion, shares in Rhone-Poulenc Rorer and CVRs. If, at the end of three years, the RPR share price did not exceed $98, Rhone-Poulenc had to pay CVR holders the difference between the share price and $98, to an upper limit of $46 per CVR.If the RPR share price was below $52 on August 1, 1993, RP would have to pay the CVR holders $1 billion (in FRF over 5 billion). By the end of 1991, the price of the CVR had fallen by 4/5 of its value. Its close at under $1 reflected the good performance of the group. RP took the opportunity to buy all the CVRs it had been offered. During the first year after issue, the group gathered in 20. 7 million CVRs, half the total number issued. 3. The assumption is that RP is not going to use its right to extend the maturity of the CVRs, and they are thus expiring in July 31, 1993.We have used the binomial tree (Exhibit A) to value the CVRs as a put option. The value of a CVR is thus $5. 54, and the aggregate value is $231. 64 million. I have assumed risk-free rate of 8. 20 percent, which is the yield of a 3-year U. S. Treasury note. The standard deviation was given, 18 percent, and we have used it to calculate u and d enabling me to calculate p also. We have used $36. 50 as S(0). Secondly, we have calculated the value of the CVRs in August 1991, assuming this is the date when the case was written. In addition, we are still assuming that RP isn’t going to extend the maturity.We have used almost the same method as above (Exhibit B) and the value of a CVR is $2. 78, and the aggregate value is thus $116. 34 million. Only difference is that we used 0. 172 (=0,18*(SQRT(11/12)) as standard deviation, since there is not full year until maturity. We have used 8. 09 percent as the risk-free rate, which is the yield of a 2-year Treasury note. The share price in August 1, 1991 was $45. 75, which is the value of S(0) in my calculations. As we can see, the value of the CVR is considerably smaller in the latter case, due to the decrease in the time value of the put option. 4. The investor can see the offering quite attractive.This is due to the fact that they now have limited their downside risks with the put option. This means the minority have an effective hedge against the possibility of failure of the upcoming merger. The investors are receiving a cash payment of $49. 13 (or $53. 06 in the case of RP extending the maturity) minus the then prevailing share price or $26. 00. In one hand their shares can gain possible extra value and in the other they have a limit for the possible losses. Rhone-Poulenc managed to entice all the shareholders of the acquired Rorer with its somewhat complicated three-stage transaction.The initial tender offer and giving the rights to control RP’s HPB was attractive enough for Rorer to accept the deal. The Contingent Value Rights gave the minority shareholders the rights they though t were valuable enough to close the deal. Rorer believed that the whole package was indeed worth of $36. 50 per share. Rorer benefited from the announcement of this deal and gained about $632 million in new value. However, RP’s non-voting common shares decreased 4. 4 percent, or $175 million, in value. The fact is, all in all, that RP has a huge liability due to the CVRs.In the worst case scenario, the share price falls below $26. 00 and the liability would thus be ($49. 13 – $26. 00) * 41. 8 million = $966. 83 million, which is the maximum amount of RP’s liability. The maximum liability was perfectly hedged, providing RP a delta neutral position. This is possible through adjusting the ratio of CVRs and RPR equity, in the case of price changes of these CVRs. Extra question RP would prefer the share price to stay higher than $49. 13 until 1993, and $53. 06 until 1994. This is because in these cases RP would not be obliged to pay CVR-holders the cash payments.Thus if the share price would be higher than $49. 13 in the expiration date of the CVRs, RP would not extend the maturity of the Contingent Value Rights. I have calculated the value of the CVRs in case the maturity is extended until 1994. The calculations are in the Exhibit C, and the value of a CVR is thus $5. 57 and the aggregate value is $232. 89 million. In 1993, if the share price is S(uud) = $43. 70, the CVRs’ maturity might be extended, because now there would be a possibility of the share price to increase to $52. 32 and the extension would have been preferable.

Research on Behaviour of Children with Stay at Home Mothers and Working Mothers

Aim: To study the emotional behaviour of children with stay at home mothers for the first five years and working mothers. Hypothesis: To show that children with stay at home mothers for the first five years of their lives are more emotionally balanced than children with working mums.Literature review: What is a Mother? The dictionary describes a mother who has born a child of the origin orsource of something like a mother plant. Mother means selfess devotion, limitless sacrifices, and love that passes understanding. She is someone who loves unconditionally and places the needs of her children above her own, on a personal level, not only in words but also in actions. â€Å"A woman who has compassion, kindness, humility, gentleness and patience is a mother. She can fogive as the Lord forgave us and above all these virtues is the love that binds them together† (Romans:13:14)STAY AT HOME MUM: YOU CAN'T PUT A PRIECE ON MOTHERHOOD. There is a dilemma that comes with having children, and it plagues many new mother â€Å"Should I be a stay at home mum?† Even the most ambitious women sucumb to the nesting instinct of the maternal nature. It is a personal and specific decision that has its perks as well as its pitfalls. Advancements in women's rights in the workplace have encouraged women to acquire higher paying jobs. However, recent research suggests that more women are choosing to stay at home. It is not because of a lack of education or opportunity; they simply don't want to have someone else raise their children.A study by the National Institute of Child Health and Human Development (NICHD) in 1999 found that the more hours a child spent at a non-maternal care before age 5, the less positive the childs interactions with his/her mother will be. Two studies published in 2003 conducted by the NICHD found that children in day care had higher levels of stress and were more aggressive than those cared for at home by the mother. There are millions of children , however, who have working mothers and who grow up to be responsible, sucessful adults.Benefits for children raised by stay-at-home mothers. STABILITY: This is the main benefir for your children. Knowing that you are there gives your child stability. You are able to answer your child  questions, dry tears, and offer support. In addition, you will never get those year back. They experience fewer emotional and behavioural problems in childhood: want to help ensure your children turn out to be happy and socially well adjusted? Bond with them when they are infants.Thats the message from the university of Lowa, USA, which found that infants who have a close intimate relationship with their mothers are less likely to be troubled, aggressive or experience other emotional and behavioural problems when they reach school age. Bonding with your child has proven to help in a childs mental and emotional development.Consistency: Your children can rely on you. They can trust the consistency on the way you run your household. Being consistent with mealitimes, Chores, baths, and bedtimes teaches children organization and discipline. They need this consistency to give them structure and routine in their lives. Quality time: All kids need quality time with their mothers. Quality time gives them the assurance of being loved all the time. Quality time also keeps your child out of trouble, which often stems from boredom. the memories they will have of you depend on this quality time

Enterprise Resource Planning Systems Essay

The enterprise resource planning system attempts to integrate or integrates all the data and also processes of an organization into a system that is unified. A typical system of the enterprise resource planning uses the multiple components of the computer hardware and software so as to achieve the integration. The key ingredient of most of the systems in enterprise resource planning is the usage of a unified database in storing the data for various system modules. Comparison between customer relationship management and supply chain management Similarities Both customer relationship management and the supply chain management are examples of modules in the enterprise resource planning system which formally would have been stand alone applications. (Monk and Wagner2006) Differences The data that is contained in the supply chain management software includes; inventory, commission circulation, order entry, claim processing, purchasing, inspection of goods, product configurator, supplies scheduling and the supply chain planning. On the other hand the data that is contained in the customer relationship management software includes; sales and marketing, call center support, customer contact service as well as commissions. On the other hand the supply chain management is a process of planning, implementing and controlling all the operations of the supply chain with a lot of efficiency. While the customer relationship management covers the concepts which are used by various companies in managing their relationships with the customers and they also include capturing, storing, analyzing the customers, vending, partnering and also information on the internal processes. The operational functions of the customer relationship management involve providing support to the front office business processes which include service and sales and marketing. The operational functions of the supply chain management includes activities such as; the daily production and distribution planning, sourcing planning, inbound operations, production operations and also order promising. (Monk and Wagner2006) The supply chain addresses problems on the distribution network configuration, the distribution strategies, information, inventory management as well as the cash flow. On the other hand the customer relationship management addresses the issues marketing sales and service. The customer relationship management has the capability of executing all the three sub modules through the multiple communication channels and the data that is gathered by the CRM considers the privacy of the customer as well as the security of the data. On the other hand the supply chain management components are the third elements of the four square circulation frameworks. Differences between financial accounting and managerial accounting Type of information and confidentiality Financial accounting mainly concentrates on the production of the financial reports which includes profitability, the basic reporting requirements, stability, solvency and liquidity. The reports of this nature can easily be accessible by the external and the internal users. On the other hand management accounting is a branch of accounting which deals with primarily very confidential financial reports for the restricted use of the organizations top management. (Monk and Wagner2006)    Whereas the financial accountants follow the GAAP (generally accepted accounting principles) that have been set by professional bodies in each country, the managerial accountants make use of the processes and also procedures that are not regulated by the standard setting bodies. On the other hand the multinational companies prefer employing the managerial accountants who have passed the certification in CMA. The certified management accountant (CMA) is an examination that is given by the institute of management accountant which is a professional organization for the accounting professionals. (Monk and Wagner2006)However the certification is very different and also unique from the chartered accountant certificate or CPA. Time period The managerial accounting provides the top management with reports which are future based while on the other hand the financial accounting provides reports that are based on the historical information. However even though the management accountants base their reports on the historical values they also employ the statistical methods so as to arrive at the future values. In both the financial and managerial accounting the enterprise resource planning systems benefits the workers in various ways. (Monk and Wagner2006) Information on the payroll of the sales people This information will be very useful in the management o the sales team in the Snackers sales department. This is because the manager will be able to know the consistency of each sales persons pay in relation to their performance. On the other hand such information will help the manager to pay the sales people according to the defined contract which could be inform of incentives, commission or a basic salary. (Monk and Wagner2006) Information on training of the sales people This information will be helpful in the management of the sales people since it will help in identifying the extent to which the sales people have been trained and also how far hey have been able to go with their training. This information is also useful since it helps in showing what the sales people have not been trained in and the consistency in their training. Such information will also be useful in the identification of the refresher courses on the sales people since such training is very important to the company sales and marketing strategies. (Monk and Wagner, 2006) Information on time and attendance of the sales people This information will help the management identify the employee’s trends in reporting and attending to their official duties. It will also help in identifying the employees who are consistent in their attendance and those who are not. Such information would be very useful especially when promoting the employees , increasing their   responsibilities, giving them incentives, taking any disciplinary actions and also in retrenchments and transfers. Information on the benefits of the sales people This information would be helpful to the management since it will give the basis of the benefits of the employees. Such information would help the company’s management to award the sales people with their correct benefits and incentives which they are entitled to during or after their term of service.